INDOOR PIR CAMERA: battery operated, wireless indoor motion-activated video camera.
The INDOOR PIR CAMERA consists of a digital camera, a passive infrared motion detector, and S2VIEW®1 spread spectrum, Videofied interactive, encrypted wireless circuitry for secure two-way communications with the control panel. The camera consists of a CMOS black and white sensor and an 85°, wide angle lens. Two infrared LEDs provide a night illumination distance of approximately 14 feet/4.5 meters. For motion or movement detection, a fresnel lens inside the cover disperses a 40-foot wide, 90° angle passive infrared pattern. The base allows for flat wall or corner mounting. A dual tamper function provides for both wall and cover tamper detection.
The camera is typically installed to cover entire rooms, hallways, job trailers, offices, stairwells, and other similar areas where broad viewing/detection coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector transmits a signal and activates the camera, which captures a 10-second digital video segment. The control panel receives the signal and responds according to system configuration/programming.
The alarm and video segment are reported via the control panel to the central monitoring station, and can also be sent to Email addresses for viewing. The detector is powered by three lithium batteries that can last four years or more, depending on the amount of detector activity.
The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture, software revision, and battery status.
1: S2View®—Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
[specifications] |
